"a woodworkers candy store"

R1E = Ripped on one edge.  This edge is straight enough to accept a glue joint.   Typically R1E stock has not been surfaced planned.

We will "clean up" any rough sawn lumber for $0.20/bf.  1/16" will be taken off of both sides.

4/4 (four quarter) is the equivalent to 1" thick when the lumber is still rough sawn.  When 4/4 lumber is planed, typically it is finished at 13/16" thick.

5/4 (five quarter) is the equivalent to 1.25" thick when the lumber is still rough sawn.  When 5/4 lumber is planed, typically it is finished at 1.063" thick.

6/4 (six quarter) is the equivalent to 1.5" thick when the lumber is still rough sawn.  When 6/4 lumber is planed, typically it is finished at 1.25" thick.

8/4 (eight quarter) is the equivalent to 2" thick when the lumber is still rough sawn.  When 8/4 lumber is planed, typically it is finished at 1.75" thick.

12/4 (twelve quarter) is the equivalent to 3" thick when the lumber is still rough sawn.  When 12/4 lumber is planed, typically it is finished at 2.75" thick.

16/4 (sixteen quarter) is the equivalent to 4" thick when the lumber is still rough sawn.  When 16/4 lumber is planed, typically it is finished at 3.75" thick.